Materials & Alloys - Rio Tinto Metal Powders

Technical Papers:

Materials & Alloys

[list]

[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2016 Nanometric Surface Modification of Iron and Steel Powders

Presented at the World PM 2016 congress & exhibition in Hamburg, Germany in October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
R. R. Vintila, R.A.L. Drew, Mechanical & Industrial Engineering, Concordia University, L.Y. Aguirre-Perales, V. Paserin, Rio Tinto Metal Powders
[/list_item]

[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2016 Binder-jetting additive manufacturing with water atomized iron powders

Presented at the AMPM 2016 conference on Additive Manufacturing, held with MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials in Boston, USA, in June 2016.
V. Paserin, I. Bailon-Poujol, Rio Tinto Metal Powders, Canada & K. Inaekyan, V. Brailovski, ÉTS – École de technologie supérieure
[/list_item]

[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2016 Characterization of Iron Powder Mixes Prepared with a Compressible Iron Powder

Presented at the PM16 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in 2016. Conference proceedings are available from the Powder Metallurgy Association of India.
M. Moravej, I. Bailon-Poujol, C. Labrecque, Rio Tinto Metal Powders & P. Khole, Rio Tinto India
[/list_item]

[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2014 Effect of C, Mn and Cr conc, dens, sint temp and cool rates on prop of Lean Alloy PM Steels

Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in
Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-
2014 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon, J. Campbell-Tremblay and C. Blais Rio Tinto Metal Powders, Laval University
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2014 Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications

Presented in September 2014 at the Euro PM Congress on powder metallurgy in Salzburg, Austria, organized by the European Powder Metallurgy Association Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Julie Campbell-Tremblay, Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2014 Development of high compressible leaner alloyed steel powders equivalent to Mo-Ni-Cu diffusion bonded powders

Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-2014 conference proceedings available from the Metal Powder Industries Federation.
Sylvain St-Laurent and Julie Campbell-Tremblay, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2013 Properties of various MIP Grades

Presented at the Euro PM2013 congress held in Gothenburg, Sweden in September 2013
and published in the congress conference proceedings available from the
European Powder Metallurgy Association (EPMA).
François Chagnon, Julie Campbell-Tremblay and Maryam Moravej,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2013 A new approach to Lean Alloy PM Steels

Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held
in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate
Materials-2013 conference proceedings available from the Metal Powder Industries Federation
François Chagnon and Lydia Aguirre,
Rio Tinto Metal Powders
[/list_item]

[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2013 Development of optimized diffusion alloyed powders

Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in
Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials-
2013 conference proceedings available from the Metal Powder Industries Federation
Julie Campbell-Tremblay and Sylvain St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2012 Machinability of Malleable Iron Powder Materials vs Ductile Iron and Powder Forged FC-0205 Materials

Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October
2012 and published in the congress proceedings available from the
Asian Powder Metallurgy Association (APMA).
M. Moravej, J. Campbell-Tremblay, C. Labrecque,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2012 Development and Properties of a New Malleable Iron Powder Grade

Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy & –
2012 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon and C. Coscia,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2012 Design of Low Cost High Performance Diffusion-alloyed Powders

Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October
2012 and published in the congress proceedings available from the
Asian Powder Metallurgy Association (APMA).
J. Campbell-Tremblay, S. St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2012 Characterization and mech properties and machining performance of new malleable iron powder

Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy
&Particular Materials – 2012 conference proceedings available from the Metal Powder Industries
Federation.
M. Moravej, F. Chagnon and J. Campbell-Tremblay,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2011 Effect of powder mix formulation and sintering conditions on dimensional stability of sinter hardened powders

Presented at the PM11 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in February 2011 and conference proceedings are available from the Powder Metallurgy Association of India
Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2010 New iron powder for low density applications

PM2010 World Congress – Water Atomized Powders
François Chagnon, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]

2005 Effect of Nickel Type on Properties of Binder-Treated Mixes
L. Azzi, S. Pelletier, T. Stephenson of Industrials, and S. St-Laurent of QMP, PM2TEC 2005 conference, Montreal, June 2005