Mechanical Properties « Rio Tinto Metal Powders

Technical Papers:

Mechanical Properties

2016 Dilatometric Analysis of Pre-Alloyed High Hardenability PM Steels Containing Elemental Cu Additions
Presented at the World PM 2016 congress & exhibition in Hamburg, Germany / October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
I. Bailon-Poujol, V. Paserin, Rio Tinto Metal Powders, S. Sainz, A. Veiga and F. Castro, CEIT, San Sebastian, Spain
2014 Effect of C, Mn and Cr conc, dens, sint temp and cool rates on prop of Lean Alloy PM Steels
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials- 2014 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon, J. Campbell-Tremblay and C. Blais Rio Tinto Metal Powders, Laval University
2014 Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Presented in September 2014 at the Euro PM Congress on powder metallurgy in Salzburg, Austria, organized by the European Powder Metallurgy Association Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Julie Campbell-Tremblay, Sylvain St-Laurent, Rio Tinto Metal Powders
2014 Development of high compressible leaner alloyed steel powders equivalent to Mo-Ni-Cu diffusion bonded powders
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-2014 conference proceedings available from the Metal Powder Industries Federation.
Sylvain St-Laurent and Julie Campbell-Tremblay, Rio Tinto Metal Powders
2013 Properties of various MIP Grades
Presented at the Euro PM2013 congress held in Gothenburg, Sweden in September 2013 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
François Chagnon, Julie Campbell-Tremblay and Maryam Moravej, Rio Tinto Metal Powders
2013 Effect of Lubricant Particle Size Distribution on the Processing and Properties of PM Ferrous Parts
Euro PM2013 – Lubricants
Yannig Thomas, Fabrice Bernier, Sylvain St Laurent and Vincent Paris, National Research Council Canada, Rio Tinto Metal Powders
2013 A new approach to Lean Alloy PM Steels
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials-2013 conference proceedings available from the Metal Powder Industries Federation
François Chagnon and Lydia Aguirre, Rio Tinto Metal Powders
2013 Development of optimized diffusion alloyed powders
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials- 2013 conference proceedings available from the Metal Powder Industries Federation
Julie Campbell-Tremblay and Sylvain St-Laurent, Rio Tinto Metal Powders
2012 Development and Properties of a New Malleable Iron Powder Grade
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy & – 2012 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon and C. Coscia, Rio Tinto Metal Powders
2012 Design of Low Cost High Performance Diffusion-alloyed Powders
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October 2012 and published in the congress proceedings available from the Asian Powder Metallurgy Association (APMA).
J. Campbell-Tremblay, S. St-Laurent, Rio Tinto Metal Powders
2012 Characterization and mech properties and machining performance of new malleable iron powder
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy &Particular Materials – 2012 conference proceedings available from the Metal Powder Industries Federation.
M. Moravej, F. Chagnon and J. Campbell-Tremblay, Rio Tinto Metal Powders
2010 New iron powder for low density applications
PM2010 World Congress – Water Atomized Powders
François Chagnon, Rio Tinto Metal Powders
2010 Development of cost effective organic-bonded Mo-Ni-Cu steel powders with the FLOMET process
Presented at the 3rd Spanish Congress of Powder Metallurgy (III Congreso Nacional de Pulvimetalurgia) in Valencia, Spain in June 2010 at the Polytechnic University of Valencia.
S. Saint-Laurent, P. Francois, Rio Tinto Metal Powders
2010 Achieving high density by single compaction of steel powder premixes
Presented at PM2010 World Congress in Florence, Italy
Sylvain St-Laurent of Rio Tinto Metal Powders and Odyssey Wang and Ray Guov of QMP Metal Powders (Suzhou) Co., Ltd. and Kevin Zhang and Aileen Cao of Porite Yangzhou Industry Co., Ltd
2005 Using Binder-Treatment Technology for High Performance Steel Powder Mixes
L. Azzi and Y. Thomas of Industrial Materials Institute, C. Gelinas and S. St-Laurent of QMP, PM2TEC 2005 conference, Montreal, June 2005
2005 Effect of Nickel Type on Properties of Binder-Treated Mixes
L. Azzi, S. Pelletier, T. Stephenson of Industrials, and S. St-Laurent of QMP, PM2TEC 2005 conference, Montreal, June 2005
2004 Effect of Post-Sintering Cooling Rate on Properties of Diffusion Bonded Steel Materials,
F. Chagnon and Linda Tremblay of QMP , Quebec, Canada, PM2004 World Congress & Exhibition, Vienna, Austria, October 2004.
2003 Optimizing Properties of P/M Parts Through Selection of Proper Sinter Hardening Powder Grades,
Francois Chagnon and Yves Trudel of QMP, PM2Tec Conference, Las Vegas, June 2003
2003 Effect of Molybdenum Content on Mechanical Properties of Sintered PM Steels,
C. Ruas and S. St-Laurent of Quebec Metal Powders Ltd., PTECH Brazil Conference, Guaruja, Brazil, Nov. 19-21, 2003.
2003 Fatigue Properties of Diffusion-Bonded Molybdenum Steel Powders for High Strength Applications,
G. Olschewski and Gregor Nitsch of QMP Metal Powders GmbH, Germany, Euro PM2003, Valencia, Spain, October 2003.
2002 Dynamic Properties of Sintered Molybdenum Steels,
S. St-Laurent and F. Chagnon of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Effects of Copper Addition on Properties of 1.5% Mo Sintered Steels,
F. Chagnon and Yves Trudel of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Effect of Density and Mix Formulation on Sintered Strength and Dimensional Stability of 0.85% Mo Low Alloy Steel Powders,
C. Gelinas and S. St-Laurent of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
2002 Combining Electrostatic Die Wall Lubrication and Warm Compaction to Enhance Green and Sintered Properties of P/M Components,
S. St-Laurent of QMP; P. Lemieux, Y. Thomas P.-E. Mongeon and S. Pelletier of Industrial Materials Institute, P/M World Congress, Orlando, June, 2002
2002 Diffusion-Bonded Molybdenum Steel Powders for High Strength Applications,
G. Olschewski and Gregor Nitsch of QMP Metal Powders GmbH, Germany, PM World Congress, June 2002.
2001 Influence of Powder Mix Formulation on Green and Sintered Properties of Warm Pressed Specimens,
S. St-Laurent and F. Chagnon of Quebec Metal Powders Ltd., PM2TEC Conference, New Orleans May 2001.
2001 Properties and Applications of Binder Treated Mixes as Alternatives to Diffusion Alloyed Grades
R. Guo & C. Ruas, Quebec Metal Powders Ltd., PTECH Conference, Florianopolis, Brazil, Nov.26-28,2001.
2000 Optimised Properties of Molybdenum PM Steels by Advanced Case Hardening Process,
G. Olschewski and Dr. R. Link of QMP Metal Powders GmbH, EURO PM, Oct. 18-20, 2000 Munich, Germany
2000 Effect of Sintering Temperature and Carbon Content on Static and Dynamic Properties of Diffusion-Bonded Steels,
L. Tremblay and F. Chagnon of QMP, PM2TEC New York Conference, May 2000.
2000 Transfer Case Sprocket Production through the Sinter Hardening Process,
J. Poirier, F. Chagnon, J.A. Danaher of QMP, Martin Gagné Rio Tinto Iron & Titanium, E. Ilia and S. Krise of MascoTech Sintered Components, EURO PM2000 Oct. 18-20, 2000 Munich, Germany
1999 Properties and Characteristics of Sinter Hardened P/M Steels,
F. Chagnon and C. Ruas of Quebec Metal Powders Ltd., PTECH Brazil Conference, Nov. 10-12, 1999
1999 Effect of Tempering Temperature on Mechanical Properties and Microstructure of Sinter Hardened Materials,
F. Chagon of QMP and M. Gagne Rio Tinto Iron and Titanium, presented at the PM2TEC Vancouver Conference, June 1999.
1999 Dynamic Properties of Pre-Alloyed Mo-Steel Powders for High-Loaded P/M Applications,
G. Olschewski of QMP Metal Powders GmbH and D. Barrow of QMP Metal Powders Ltd, Ipswich, DF PM99, September 19-22, 1999, Piestany, Slovak Republic
1999 Dynamic Properties of Pre-Alloyed Molybdenum Steel Powders for Gear Applications,
G. Olschewski of QMP Metal Powders GmbH, Euromat 99, September 27-30, 1999, Munich, Germany
1998 Effect of Carbon Content and Post-Sintering Cooling Rate on Mechanical Properties of High Density Sintered Materials Made from Diffusion-Bonded Powders,
L. Tremblay and F. Chagnon of Quebec Metal Powders Ltd, 1998 World P/M Conference, Granada, Spain, October 1998
1998 Effect of Density on Mechanical Properties of Sinter Hardened P/M Materials,
F. Chagnon, Y. Trudel, presented at the PM2TEC Las Vegas Conference, May 1998.
1998 Modern Prealloyed PM Steels and Advanced Process Technology,
Rainer Link of QMP-GmbH, 1998 World P/M Conference, Granada, Spain, October 1998.
1997 Effect of Tempering Temperature on Sintered Properties of Sintered Hardened PM Steels,
F. Chagnon, D. Barrow, Euro PM ’97, Advances in structural PM component production, EPMA, Munich, Germany, October 17-19, 1997.
1997 Effect of Sintering Parameters on Mechanical Properties of Sinter Hardened Materials,
F.Chagnon, Y.Trudel, presented at the PM2TEC Chicago Conference, June 1997.
1997 The Development and Characteristics of Low Alloy Steel Powders for Sinter Hardening Applications,
C.Ruas, F.Chagnon, International Conference & Exhibition on Powder Metallurgy for Automotive Components, New Delhi, February 1997.

Publications