Technical Papers:
DC Control
[list]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2016 Dilatometric Analysis of Pre-Alloyed High Hardenability PM Steels Containing Elemental Cu Additions
Presented at the World PM 2016 congress & exhibition in Hamburg, Germany / October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
I. Bailon-Poujol, V. Paserin, Rio Tinto Metal Powders, S. Sainz, A. Veiga and F. Castro, CEIT, San Sebastian, Spain
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2015 Influence Of The Particle Size Distribution And Morphology Of NI And CU Powders On The Dimensional Change Of Sintered Parts
Presented at the PowderMet 2015 MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials held in San Diego, CA USA.
I. Bailon-Poujol, J. Campbell-Tremblay, L. Aguirre, Rio Tinto Metal Powders, Canada
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2011 Improvement in Dimensional Stability of SInter-Hardening Steel Powders
Presented at the 2011 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in San Francisco, USA in May 2011 and published in the Advances in Powder Metallurgy &
Particulate Materials – 2011 conference proceedings available from the Metal Powder Industries
Federation.
Vincent Paris, Sylvain St-Laurent and Edmond Ilia, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2011 Effect of powder mix formulation and sintering conditions on dimensional stability of sinter hardened powders
Presented at the PM11 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in February 2011 and conference proceedings are available from the Powder Metallurgy Association of India
Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2010 Improvement of Dimensional Stability of Sinter Hardening Powders under Production Conditions
Presented at the Euro PM2010 congress held in Florence, Italy in October 2010 and published in the
congress conference proceedings available from the
European Powder Metallurgy Association (EPMA).
Sylvain St-Laurent and Edmond Ilia, Rio Tinto Metal Powders, Metaldyne
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2004 Factors Affecting the Dimensional Change of Sinter Hardening Powder Grades,
S. St-Laurent of Quebec Metal Powders Ltd., P.Lemieux and S.Pelletier of IMI National Research Council Canada, PM2TEC Conference, Chicago, June 2004.
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2002 Effect of Density and Mix Formulation on Sintered Strength and Dimensional Stability of 0.85% Mo Low Alloy Steel Powders,
C. Gelinas and S. St-Laurent of Quebec Metal Powders Ltd., PM World Congress, Orlando, June 2002.
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2002 Effect of Mix Formulation on the Dimensional Stability of Sintered Automotive Components
C. Gelinas and S. St-Laurent of QMP, SAE paper 2002-01-0668, Detroit, February 2002
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2001 Dimensional Control of Sinter Hardened P/M Components ,
Francois Chagnon of Quebec Metal Powders Ltd., PM2TEC Conference, New Orleans May 2001.
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2001 Effects of Product and Process Parameters on Dimensional Stability of Sinter Hardened Materials,
F. Chagnon, G. Olschewski and S. St-Laurent of Quebec Metal Powders Ltd., EURO PM2001, Nice, France, November 2001.
[/list_item]
[/list]