2016 Nanometric Surface Modification of Iron and Steel Powders
Presented at the World PM 2016 congress & exhibition in Hamburg, Germany in October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
R. R. Vintila, R.A.L. Drew, Mechanical & Industrial Engineering, Concordia University, L.Y. Aguirre-Perales, V. Paserin, Rio Tinto Metal Powders

2016 Binder-jetting additive manufacturing with water atomized iron powders
Presented at the AMPM 2016 conference on Additive Manufacturing, held with MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials in Boston, USA, in June 2016.
V. Paserin, I. Bailon-Poujol, Rio Tinto Metal Powders, Canada & K. Inaekyan, V. Brailovski, ÉTS – École de technologie supérieure

2016 Characterization of Iron Powder Mixes Prepared with a Compressible Iron Powder
Presented at the PM16 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in 2016. Conference proceedings are available from the Powder Metallurgy Association of India.
M. Moravej, I. Bailon-Poujol, C. Labrecque, Rio Tinto Metal Powders & P. Khole, Rio Tinto India

2014 Effect of C, Mn and Cr conc, dens, sint temp and cool rates on prop of Lean Alloy PM Steels
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials- 2014 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon, J. Campbell-Tremblay and C. Blais Rio Tinto Metal Powders, Laval University

2014 Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Presented in September 2014 at the Euro PM Congress on powder metallurgy in Salzburg, Austria, organized by the European Powder Metallurgy Association Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Julie Campbell-Tremblay, Sylvain St-Laurent, Rio Tinto Metal Powders

2014 Development of high compressible leaner alloyed steel powders equivalent to Mo-Ni-Cu diffusion bonded powders
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-2014 conference proceedings available from the Metal Powder Industries Federation.
Sylvain St-Laurent and Julie Campbell-Tremblay, Rio Tinto Metal Powders

2013 Properties of various MIP Grades
Presented at the Euro PM2013 congress held in Gothenburg, Sweden in September 2013 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
François Chagnon, Julie Campbell-Tremblay and Maryam Moravej, Rio Tinto Metal Powders

2013 A new approach to Lean Alloy PM Steels
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials-2013 conference proceedings available from the Metal Powder Industries Federation
François Chagnon and Lydia Aguirre, Rio Tinto Metal Powders

2013 Development of optimized diffusion alloyed powders
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials- 2013 conference proceedings available from the Metal Powder Industries Federation
Julie Campbell-Tremblay and Sylvain St-Laurent, Rio Tinto Metal Powders

2012 Machinability of Malleable Iron Powder Materials vs Ductile Iron and Powder Forged FC-0205 Materials
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October 2012 and published in the congress proceedings available from the Asian Powder Metallurgy Association (APMA).
M. Moravej, J. Campbell-Tremblay, C. Labrecque, Rio Tinto Metal Powders

2012 Development and Properties of a New Malleable Iron Powder Grade
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy & – 2012 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon and C. Coscia, Rio Tinto Metal Powders

2012 Design of Low Cost High Performance Diffusion-alloyed Powders
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October 2012 and published in the congress proceedings available from the Asian Powder Metallurgy Association (APMA).
J. Campbell-Tremblay, S. St-Laurent, Rio Tinto Metal Powders

2012 Characterization and mech properties and machining performance of new malleable iron powder
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy &Particular Materials – 2012 conference proceedings available from the Metal Powder Industries Federation.
M. Moravej, F. Chagnon and J. Campbell-Tremblay, Rio Tinto Metal Powders

2011 Effect of powder mix formulation and sintering conditions on dimensional stability of sinter hardened powders
Presented at the PM11 International conference on Powder Metallurgy for Automotive and Engineering Industries in Pune, India in February 2011 and conference proceedings are available from the Powder Metallurgy Association of India
Sylvain St-Laurent, Rio Tinto Metal Powders

2010 New iron powder for low density applications
PM2010 World Congress – Water Atomized Powders
François Chagnon, Rio Tinto Metal Powders