Publications scientifiques:
Propriétés Mécaniques
[list]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2016 Dilatometric Analysis of Pre-Alloyed High Hardenability PM Steels Containing Elemental Cu Additions
Presented at the World PM 2016 congress & exhibition in Hamburg, Germany / October 2016 and published in the congress conference proceedings available from the European Powder Metallurgy Association (EPMA).
I. Bailon-Poujol, V. Paserin, Rio Tinto Metal Powders, S. Sainz, A. Veiga and F. Castro, CEIT, San Sebastian, Spain
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Effect of C, Mn and Cr conc, dens, sint temp and cool rates on prop of Lean Alloy PM Steels
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in
Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-
2014 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon, J. Campbell-Tremblay and C. Blais Rio Tinto Metal Powders, Laval University
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Presented in September 2014 at the Euro PM Congress on powder metallurgy in Salzburg, Austria, organized by the European Powder Metallurgy Association Effect of Ni and Cu Addition on Pre-Alloyed Mo Powders Designed for High Performance Applications
Julie Campbell-Tremblay, Sylvain St-Laurent, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2014 Development of high compressible leaner alloyed steel powders equivalent to Mo-Ni-Cu diffusion bonded powders
Presented at the 2014 World congress on Powder Metallurgy & Particulate Materials Powder held in Orlando, USA in May 2014 and published in the Advances in Powder Metallurgy & Particulate Materials-2014 conference proceedings available from the Metal Powder Industries Federation.
Sylvain St-Laurent and Julie Campbell-Tremblay, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 Properties of various MIP Grades
Presented at the Euro PM2013 congress held in Gothenburg, Sweden in September 2013
and published in the congress conference proceedings available from the
European Powder Metallurgy Association (EPMA).
François Chagnon, Julie Campbell-Tremblay and Maryam Moravej,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 Effect of Lubricant Particle Size Distribution on the Processing and Properties of PM Ferrous Parts
Euro PM2013 – Lubricants
Yannig Thomas, Fabrice Bernier, Sylvain St Laurent and Vincent Paris, National Research Council Canada, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 A new approach to Lean Alloy PM Steels
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held
in Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate
Materials-2013 conference proceedings available from the Metal Powder Industries Federation
François Chagnon and Lydia Aguirre,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2013 Development of optimized diffusion alloyed powders
Presented at the 2013 International conference on Powder Metallurgy & Particulate Materials held in
Chicago, USA in June 2013 and published in the Advances in Powder Metallurgy & Particulate Materials-
2013 conference proceedings available from the Metal Powder Industries Federation
Julie Campbell-Tremblay and Sylvain St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Development and Properties of a New Malleable Iron Powder Grade
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy & –
2012 conference proceedings available from the Metal Powder Industries Federation.
F. Chagnon and C. Coscia,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Design of Low Cost High Performance Diffusion-alloyed Powders
Presented at the PM2012 Powder Metallurgy World Congress in Yokohama, Japan in October
2012 and published in the congress proceedings available from the
Asian Powder Metallurgy Association (APMA).
J. Campbell-Tremblay, S. St-Laurent,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2012 Characterization and mech properties and machining performance of new malleable iron powder
Presented at the 2012 MPIF / APMI International Conference on Powder Metallurgy & Particulate
Materials held in Nashville, USA in June 2012 and published in the Advances in Powder Metallurgy
&Particular Materials – 2012 conference proceedings available from the Metal Powder Industries
Federation.
M. Moravej, F. Chagnon and J. Campbell-Tremblay,
Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2010 New iron powder for low density applications
PM2010 World Congress – Water Atomized Powders
François Chagnon, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2010 Development of cost effective organic-bonded Mo-Ni-Cu steel powders with the FLOMET process
Presented at the 3rd Spanish Congress of Powder Metallurgy (III Congreso
Nacional de Pulvimetalurgia) in Valencia, Spain in June 2010 at the
Polytechnic University of Valencia.
S. Saint-Laurent, P. Francois, Rio Tinto Metal Powders
[/list_item]
[list_item size=”large” icon=”icon-book” hex_color=”ff3300″]
2010 Achieving high density by single compaction of steel powder premixes
Presented at PM2010 World Congress in Florence, Italy
Sylvain St-Laurent of Rio Tinto Metal Powders and Odyssey Wang and Ray Guov of QMP Metal Powders (Suzhou) Co., Ltd. and Kevin Zhang and Aileen Cao of Porite Yangzhou Industry Co., Ltd
[/list_item]
[/list]